Introduction

Note to Users:

Enthusiastic about engaging in LilyPad? Or even it really is Arduino that tickles your fancy? Both? Well, whatever it really is, the ProtoSnap LilyPad Development Board is really a great device to begin with!

LilyPad ProtoSnap Developing Board

The ProtoSnap show is a brand new option to prototype assembling your project without a breadboard. All things are wired together in one bo…

LilyPad Lab Pack

The ProtoSnap LilyPad developing Board is a way that is good introduce and explore e-textiles. This LabPack includes everything y…

The ProtoSnap LilyPad Development Board features a conglomerate of some of the most popular LilyPad panels. During the center with this mish-mash is our LilyPad Arduino Simple Board — a tiny, LilyPad type of the popular Arduino development platform. Making use of the included FTDI fundamental Breakout, you are able to plan this board to do business with a entire mess of inputs and outputs:

Each one of these are generally wired as much as the LilyPad Arduino Simple. Then, when you feel comfortable programming the Arduino to speak with dozens of panels, each piece can be broken by you down separately and implement them into the task you see fit. But.

Needed Materials

To reprogram and charge the board, you will have to connect a mini-B USB cable. Make sure that it’s maybe maybe not labeled ‘Power Only’ since these types of cables will maybe not transfer the development information required because of the LilyPad Arduino Simple Board. If you do not get one you will get one from SparkFun:

SparkFun USB Mini-B Cable – 6 Foot

This is certainly a USB 2.0 kind A to Mini-B 5-pin cable. You know, the mini-B connector that always includes USB Hubs, Cameras, MP3…

Recommended Reading

If you’ren’t acquainted with the next ideas, we recommend looking at these tutorials before continuing.

What exactly is an Arduino?

Installing Arduino IDE

Arranging a Wearable Electronics Project

Hardware Overview and Features

The LilyPad Development Board features twelve LilyPad elements attached to a LilyPad Arduino Simple microcontroller by conductive pathways called traces. A number of these traces are concealed, however for guide, each component in the ProtoSnap features a nearby label printed in white silkscreen with all the amount of the LilyPad Arduino Simple sew tab it really is connected to.

If you have utilized an Arduino before, you are most likely knowledgeable about its pins — both electronic and analog. An Arduino has 14 electronic pins, and six or eight analog pins, each of which may be used to interface along with other components; for example, those surrounding the Arduino in the ProtoSnap LilyPad developing Board.

You need to understand which pin from the Arduino is linked with which component. If you ever desire a reminder of just just what pin links as to the, whatever you really should do is look down.

A few of the sew track of the LilyPad Arduino Simple have actually unique functionality:

An ‘The’ in front for the quantity denotes a tab that may be an analog input. These sew tabs can read sensors that output a varying voltage like the light sensor constructed into the LilyPad Arduino Simple.

Discussing the image that is annotated associated with LilyPad developing Board, a ‘

‘ expression at the quantity shows that tab supports PWM ( Pulse Width Modulation) production. These tabs can output an “analog” sign which can be used to alter the brightness on LEDs, etc.

Note: The “A” in the front of analog sew tab figures in your rule is optional. Nonetheless, usually do not through the “

” icon for PWM outputs. It’s just supplied making it possible for one to always check which pins can create PWM (analog) production and it is maybe maybe not found in development.

But, if the eyes are not around reading that tiny text, listed here is a listing of the components which are attached to the LilyPad Arduino Simple:

Minds up! whenever intending to snap the LilyPad elements apart for the task, not totally all the components should be able to link as a result of the design mail-order-bride.net review for the LilyPad Arduino Simple’s sew tabs. Specific elements are linked to the LilyPad Arduino Simple via little traces as opposed to the petals. The dining dining table above indicates which pins are linked to the sew tabs. Remember to prepare the task correctly. You shall should also redefine the pins in code whenever reconnecting the components towards the sew tabs.

As an example, you will need to reconnect the light sensor to another analog pin (like A2-A5) if you decide to snap the components off and use the light sensor instead of a white LED,. The sensor will be able to be controlled by the LilyPad Arduino Simple again by replacing the connection of one of the components. Replacing the LED on A3, will demand the rule become modified when it comes to LilyPad light sensor on A3.

LilyPad Tri-Color LED

Inside an RGB LED are three smaller LEDs – a red, green, and blue. Each one of these LEDs is attached to a sew tab on the Tri-Color LED, and they’re all linked through a standard anode (good) pin. This configuration means that to light up the LED you need to ground the individual red, green, and blue LEDs instead of sending them power unlike other RGB LEDs.